scroll 1

Welcome to my blog breaktheandroid.blogspot.com here you can surf my blog tutorials for to get root access of your android smartphones and able to update your knowledge in new technologies and the market trend of smart phones and technology era

Navigation

scroll 2

Happy to announce that our Android App Is ready to download in Play Store click here to download the application and stay updated

Tuesday, June 26, 2012

Rooting HTC Wildfire


 Rooting HTC Wildfire (Froyo)

THIS GUIDE WILL HELP YOU ROOT ANY WILDFIRE WITH HBOOT VERSION 1.01.0001/1.01.0002

This guide is in fact a combination of two other guides:
http://how2rootandroiddevices.blogspot.in/2012/06/full-guide-rooting-htc-wildfire-buzz.html
http://how2rootandroiddevices.blogspot.in/2012/06/rooting-after-alpharevx.html

I take no responsibility for whatever may happen to your phone.

To root, you first need to gain S-OFF, this part is taken from the first thread.


So here we go, 
- Before doing anything, make sure you have the latest HTC SYNC on your PC (get it from here).
- Connect your phone to PC and sync all your data (contacts, media, docs...etc.)
- Disconnect your phone, then uninstall HTC SYNC, but you must leave the drivers on your PC.
(i.e. Uninstall the htc sync program only, not the drivers)

S-OFFing the Device

Downgrade to HTC Froyo WWE for AlphaRevX "now named: Revolutionary" (HBOOT 1.01.0001)
It has been confirmed that AlphaRevX "Revolutionary" tool is not S-OFFing wildfire (buzz) 2.2.1, with HBOOT 1.01.0002!
Therefore, downgrading the HBOOT to 1.01.0001 is must for the meantime, to get an efficient S-OFF.
Lots of people seem to be having issues when trying to downgrade their Wildfire from a carrier-branded version (HBOOT 1.01.0002) to unbranded WWE (HBOOT 1.01.0001).

So, here’s a small package to help you do this.

click here.

If you have HBOOT 1.01.0001, you can skip to the step entitled Revolutionary

Extract this package somewhere you can find it, like your “Desktop” for example.

Step 1: run step1.bat from the package. This will downgrade your MISC partition to allow for the RUU downgrade.

At the end, GoldCardTool will start up, to allow you to create a goldcard which you will need before starting Step 2.

How to deal with Gold-Card Tool:
1. Switch off your phone, remove your microSD card.
2. Insert the microSD card into your card reader, connect it to your computer and format the card to FAT32 file system. 
3. Insert the card into your HTC Wildfire and power it on. 
4. Make sure USB Debugging is enabled on your phone in Menu > Settings > Applications > Development. 
5. Connect the phone to your computer via USB and set the mode to charge only. 
6. Launch Gold-Card Tool on your computer and click ‘GetCID’. 
7. Copy the CID code from the text box and click the link shown below that text box to open it in your browser window. 
8. In the browser window, enter all the details required and submit that form. 
9. You should now get an email from PSAS. Open it and download the ‘GoldCard.img’ attachment. 
10. Now set your phone’s USB mode to Mass Storage. 
11. In Gold-Card Tool, click ‘Refresh’. 
12. Select your mounted SD card from the drop-down menu saying “HTC MMC:”
13. Click ‘Load Goldcard.img’ and select the file downloaded in Step 11. 
14. Click ‘Patch MMC’ and your Gold Card will be created. You may exit Gold Card Tool once done.
After you've made the goldcard, and patched it, continue with step 2.
• Step 2: run step2.bat from the package. This will downgrade your ROM version to HTC WWE Froyo for Wildfire (unbranded).
If you get a Customer ID error while doing this, your goldcard is not working!
Create a new goldcard and re-run step2.

Revolutionary

* Steps: 
1st You need to get to: http://revolutionary.io/ to download the tool, and to get your “beta key” which you’ll get in a pop-up window in the same download page after you click the download link for (windows version).
The “beta key” is a must; the tool won’t work without it!
You’ll be asked to provide your phone “serial no.”, typically it should be something like HTXXETDXXXXX, and you can get it from: 
Settings --> about phone --> phone identity. 


Now, do the following:
1. Run latest version of HTC Sync on your PC and connect phone in HTC Sync mode and sync all your files. Remove HTC Sync and not the drivers.
2. Reboot phone.
3. Settings->Applications->Development->Check “USB Debugging”.
4. Run Revolutionary and connect phone to PC in “Charge Only mode”.
5. Revolutionary should recognize your phone and show your Device Serial number.
7. Type out the “key” in the Revolutionary tool software, keeping in mind the upper and lower case letters and press enter (you can copy / paste the key).
8. Revolutionary should start doing its job and you’ll get S-OFF in less than 90 seconds.
9. If it takes longer, just wait for the 15 minutes mark, if nothing, then reboot phone and retry. 
(Some members got S-OFF after multiple tries)

Now, to get to actually rooting the phone by installing clockworkmod and subsequently, the superuser app.

1. Ensure that your SD Card is FAT32 then copy this to the root of your SD card: http://forum.xda-developers.com/atta...7&d=1300751790
2. Go into HBOOT(switch off phone and switch on while holding down the volume down button) and click yes when it asks you to update 
3. Remove the img file from your sd card and add this file: http://bit.ly/su2361ef
4. Go into HBOOT and click Recovery!
5. Click install zip from sdcard (or some thing like that) (Protip: Navigate in the recovery with the trackpad, not the power button!)
6. Click choose zip from sdcard
7. Locate your zip and let it update
8. Boot into your now rooted phone and install ROM Manager from the market.
9. Open ROM manager and Install Clockword Mod recovery (or sth like that) twice in a row (this is important to ensure proper installation)

YOU ARE NOW ROOT!!!!    
courtesy:xda forums 

Rooting after AlphaRevX!

Should also work with Revolutionary!

Okay, it took me some trying and stuff but I finaly found a way!

Okay, this is going to be simple step-by-step 

FirsT: Copy this to the root of your SD card: http://forum.xda-developers.com/atta...7&d=1300751790
Second: Go into HBOOT and click yes when it asks you to update (note: Please make sure your SD card is FAT32 and not FAT, it must be FAT32 for this step to work.

Third: Remove the img file from your sd card and add this file: http://bit.ly/su2361ef

Fourth: Go into HBOOT and click Recovery!

Fifth: Click install zip from sdcard (or some thing like that) (Protip: Navigate in the recovery with the trackpad, not the power button!)

Sixth: Click choose zip from sdcard

Seventh Locate your zip and let it update

AND YOU'RE DONE!
Have fun being free!

If you're having problems with the HBOOT not detecting the .zip update, please check if you SD card is FAT32.



courtesy:xda forums 

[FULL GUIDE] Rooting HTC Wildfire (BUZZ) 2.2.1 with HBOOT 1.01.0002 !!


Wildfire (buzz) S-OFF, ROOTING,
& Flashing CM7 Full Guide

Disclaimer
I am not responsible if your phone gets bricked, by following the process you are voiding your warranty and significant damage may be caused to your device.
If you are naive enough to screw somewhere, then it is your responsibility.
Software are unpredictable in nature, one may/may not act as predicted especially in case of rooting (personal experience). Hence my friend, treat with ULTRA care.
In short,

I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE


All procedures were done under WINDOWS 7, 32-bit
(Please Read Through Before Starting Any Process)



With reference to member "euqiddis", regarding "backup". He's absolutely right !!


So here we go,
- Before doing anything, make sure you have the latest HTC SYNC on your PC (get it fromhere).
- Connect your phone to PC and sync all your data (contacts, media, docs...etc.)
- Disconnect your phone, then uninstall HTC SYNC, but you must leave the drivers on your PC.

(i.e. Uninstall the htc sync program only, not the drivers)




S-OFFing the Device


Downgrade to HTC Froyo WWE for AlphaRevX "now named: Revolutionary" (HBOOT 1.01.0001)
It has been confirmed that AlphaRevX "Revolutionary" tool is not S-OFFing wildfire (buzz) 2.2.1, with HBOOT 1.01.0002!
Therefore, downgrading the HBOOT to 1.01.0001 is must for the meantime, to get an efficient S-OFF.
Lots of people seem to be having issues when trying to downgrade their Wildfire from a carrier-branded version (HBOOT 1.01.0002) to unbranded WWE (HBOOT 1.01.0001).

So, here’s a small package to help you do this.

click here.

Extract this package somewhere you can find it, like your “Desktop” for example.

Step 1: run step1.bat from the package. This will downgrade your MISC partition to allow for the RUU downgrade.

At the end, GoldCardTool will start up, to allow you to create a goldcard which you will need before starting Step 2.

How to deal with Gold-Card Tool:
1. Switch off your phone, remove your microSD card.
2. Insert the microSD card into your card reader, connect it to your computer and format the card to FAT32 file system. 
3. Insert the card into your HTC Wildfire and power it on. 
4. Make sure USB Debugging is enabled on your phone in Menu > Settings > Applications > Development. 
5. Connect the phone to your computer via USB and set the mode to charge only. 
6. Launch Gold-Card Tool on your computer and click ‘GetCID’. 
7. Copy the CID code from the text box and click the link shown below that text box to open it in your browser window. 
8. In the browser window, enter all the details required and submit that form. 
9. You should now get an email from PSAS. Open it and download the ‘GoldCard.img’ attachment. 
10. Now set your phone’s USB mode to Mass Storage. 
11. In Gold-Card Tool, click ‘Refresh’. 
12. Select your mounted SD card from the drop-down menu saying “HTC MMC:”
13. Click ‘Load Goldcard.img’ and select the file downloaded in Step 11. 
14. Click ‘Patch MMC’ and your Gold Card will be created. You may exit Gold Card Tool once done.
After you've made the goldcard, and patched it, continue with step 2.
• Step 2: run step2.bat from the package. This will downgrade your ROM version to HTC WWE Froyo for Wildfire (unbranded).
If you get a Customer ID error while doing this, your goldcard is not working!
Create a new goldcard and re-run step2.

Revolutionary

* Steps: 
1st You need to get to: http://revolutionary.io/ to download the tool, and to get your “beta key” which you’ll get in a pop-up window in the same download page after you click the download link for (windows version).
The “beta key” is a must; the tool won’t work without it!
You’ll be asked to provide your phone “serial no.”, typically it should be something like HTXXETDXXXXX, and you can get it from: 
Settings --> about phone --> phone identity. 


Now, do the following:
1. Run latest version of HTC Sync on your PC and connect phone in HTC Sync mode and sync all your files. Remove HTC Sync and not the drivers.
2. Reboot phone.
3. Settings->Applications->Development->Check “USB Debugging”.
4. Run Revolutionary and connect phone to PC in “Charge Only mode”.
5. Revolutionary should recognize your phone and show your Device Serial number.
7. Type out the “key” in the Revolutionary tool software, keeping in mind the upper and lower case letters and press enter (you can copy / paste the key).
8. Revolutionary should start doing its job and you’ll get S-OFF in less than 90 seconds.
9. If it takes longer, just wait for the 15 minutes mark, if nothing, then reboot phone and retry. 
(Some members got S-OFF after multiple tries)

Rooting the device:
Step 1 - Installing the USB drivers 
Download USB drivers (here) and extract them on desktop. Turn off your wildfire and boot into HBOOT by holding the VOLUME DOWN + POWER button. Connect your phone to your PC and it will show "drivers installing" or similar there for Android device. When prompted, install the drivers by going to device manager and browsing to the folder where you extracted the drivers. Once installed, disconnect and reboot your phone normally.
Now you need to install the “Android bootloader interface”. 
Connect your HTC wildfire to the PC and it will ask for drivers again, now go to device manager, click on unknown device “other devices”.
Click on update driver -> install from specific location -> No i will choose to install -> choose Android phone and click on “adb interface” -> click next -> when asked to install click on continue anyway, just install them. 
Once done you will see your phone recognized as "Android bootloader interface". 
Now disconnect your phone and go into:
Settings -> applications - > development - > enable USB Debugging.
Congratulations, the first step is complete.



N.B: 
At that point, I got a real headache trying to fix that driver thing! What happened with me was totally different, the windows (7, 32-bit) didn’t seem to recognize any of these drivers and I was really so desperate, was about to give up the whole thing!
But, I’ve tried something that perfectly worked, and the driver was fixed!
How? Here we go:
If the drivers didn’t work, proceed with Step 2.
While the RUU installation is proceeding it will fix the driver itself, the installation will stop giving you a connection error, don’t panic, just exit, restart your computer (keep your phone connected, DO NOT unplug it), then start the RUU again, it will proceed normally till the end. 



 

Step 2 - Downgrading from Android 2.2.1 Froyo to Android 2.1 Éclair
Download the RUU rom (here) which is an original stock rom. Plug your phone into the PC and set it to "Charge through USB". Double click RUU rom .exe
Follow the on screen instructions and then let it install. Your phone will reboot into stock HTC 2.1 
This will be the last time you will be seeing it though.

Step 3 - Gaining root using Unrevoked, get ClockworkMod and set your phone free
Download the test version of unrevoked (here). Let me repeat, DO NOT USE UNREVOKED 3.32 as it will lead to CID errors or to be precise this error
"Validation error, backup CID is missing"
This may be caused as the 3.32 does not support the HBOOT. Hence you need specific test version of Unrevoked 3.2 to do the job. Download it, save it on desktop, and run it. Now connect your phone and the rooting will start. Once done, you will have ClockworkMod recovery installed on your phone. 
Reboot your phone now (using the VOLUME UP/DOWN key for navigation and clicking using TRACKBALL, the POWER button takes you back in menus). Once rebooted, you will see the “Superuser” app in your phone and.... 

congratulations, your phone is successfully rooted.

Flashing CM-7 ROM (or any other ROM)
Installing CyanogenMod 7 (Android Gingerbread 2.3.3)
Download the CyanogenMod 7 (here) (choose stable mod) for best results and download the latest version.
You will also need Google apps (here) or here (for latest version).
Place both files on desktop, connect your phone as USB disk-drive and transfer both zip files on SD card. Once done, reboot your phone into ClockworkMod Recovery (booting by holding the VOLUME DOWN + POWER button and clicking on recovery) 
Once the device boots into the ClockworkMod Recovery, use the side VOLUME buttons to move around, and either the POWER button or the TRACKBALL to select.
• Select the option to “Wipe data/factory reset”. 
• Then select the option to “Wipe cache partition”. 
• Select Install zip from SDcard. 
• Select Choose zip from SDcard. 
• Choose update-cm-7.0.3-buzz-signed.zip & Let it install. 
• Once done, Select Install zip from SDcard. 
• Select Choose zip from SDcard, choose gapps-gb-20110307-signed.zip 
• Once the installation has finished, get back to the main menu by clicking the POWER button and select the “Reboot system now” option. 
Congratulations 
The HTC Wildfire should now boot into CyanogenMod

Wednesday, June 20, 2012

How to Root Samsung Galaxy Y S5360


How to Root Samsung Galaxy Y S5360


Samsung has finally launched its low end Smartphone in order to compete with Smartphone havingvery low cost and supporting android operating system. This Smartphone by Samsung is named asSamsung Galaxy Y S5360.This Smartphone has 2MP camera, Android 2.3 OS, 832 MHz processor and 3.0 inch TFT capacitive touch screen.
samsung galaxy Y How to Root Samsung Galaxy Y S5360
However as this Samsung Galaxy Y S5360 was at low cost it has got some less features as well as low optimization on Operating System all in order to come to its low price. In order to remove the limited functionality of this device the rooting of the Smartphone is necessary. Rooting process is known to be quite risky but yes if followed properly you will be completely safe. Rooting is very compulsory step required for low end Smartphones. So let’s get started. But remember to completely charge your device as this is the starting requirement.
Safety First :
As you are going to do a risky job follow these safety measures before starting.
  • Your Smartphone should be fully charged or at least with 60% charged, in order to get ready for rooting else if you try on low battery your Device will crash and hence will get Jammed.
  • Backup all your Data like Images, Contacts etc. before rooting because all files will get removed during rooting of the device.
  • Close all the background applications, especially antivirus and battery checkup utility.
  • If you a newbie, better Pray to god hoping everything would go fine icon razz How to Root Samsung Galaxy Y S5360
  • Before Starting, Enable USB Debugging on your mobile. This can be done as follows Settings > Applications > Development

Steps Required in Rooting your Samsung Galaxy Y S5360

  1. Download the Required Root Package HERE
  2. Connect your Device Samsung Galaxy Y S5360 to the computer only via USB. (Forgot about Bluetooth)
  3. No Extraction is required. Copy the Zip file to the root of the SD card and remember not to paste in any folder as it would cause an interruption.
  4. Never Unplug your Device Samsung Galaxy Y S5360 while rooting
  5. Switch off your Smartphone to enter into recovery mode
  6. Keep pressing The Volume Up KeyHome key and Power Button  to enter the recovery mode.
  7. Now, as you are in the recovery mode only Volume up and down would work to select the file. So use those  buttons and select Update.zip .
  8. The rooting will start taking place after you have selected on Update.zip. It would usually take about 10-15 mins
  9. After rooting the device will automatically restart and then normal booting will take place. Therooting of your Phone is now done!
Congratulations! You have successfully rooted your Smartphone Samsung Galaxy Y S5360 and now you can add any applications without any limitation as well as you can even install Custom ROM or Cyanogen Mod, if you wish.

HOW TO ROOT SAMSUNG GALAXY S3 III



INTRODUCING THE SAMSUNG GALAXY S3 TOOLKIT


FUNCTIONS OF SAMSUNG GALAXY S3 TOOLKIT V1.0 [GSM][11TH JUNE 2012]
  • Install drivers automatically
  • Backup/Restore a single package or all apps, user data and Internal Storage
  • Backup your /data/media (virtual SD Card) to your PC for a Full Safe backup of data
  • Perform a FULL NANDROID Backup of your system via adb and save in Custom Recovery format on your PC
  • Pull /data and /system folders, compress to a .tar file and save to your PC
  • Backup/Restore your /efs partition
  • Dump selected Phone Partitions, compress to a .zip file with md5 and save to your PC
  • Install BusyBox binary on phone
  • Root any public build (different options available)
  • Flash Stock Recovery or CWM Recovery (thanks to ChainFire for his modified CWM)
  • Flash Insecure Boot Image for adb mode
  • Install a single apk or multiple apk's to your phone
  • Push Files from your PC to your phone
  • Pull Files from your phone to your PC
  • Set Files Permissions on your phone
  • Dump selected LogCat buffers to your PC
  • Dump BugReport to your PC (if installed)
  • Help, Information Screen for various tasks
  • Reboot Phone options in adb mode
  • Change background, text colour in ToolKit
--------------------------------------------------------------
--------------------------------------------------------------


!CLICK HERE TO DOWNLOAD THE SAMSUNG GALAXY S3 TOOLKIT V1.0!


Please remember this is the 1st release and there may be some errors. Report anything you find so I can fix them asap.


NOTE: As the ToolKit.exe file isn't Digitally Signed with a Microsoft Certificate it 'may' get picked up as potentially harmful by Antivirus Programs and deleted on first run. If this happens restore the file and exclude it from future scans to use it.


--------------------------------------------------------------
--------------------------------------------------------------


THE EXTRAS V.I.P. SECTION IS AVAILABLE TO DONATORS AND CONTRIBUTORS OF THE TOOLKIT AS A THANK YOU FROM ME. THIS SECTION CONTAINS BROWSER TIPS, GENERAL TIPS, KEYBOARD TIPS, MARKET TIPS, SCREEN TIPS, SECURITY TIPS AND SETTINGS TIPS AS WELL AS A FEW TRICKS YOU CAN DO WITH YOUR PHONE. I WILL CONTINUE TO ADD TO IT BUT IN NO WAY SHOULD YOU DONATE JUST TO SEE THE EXTRAS SECTION AS IT WAS ONLY MADE AS A THANK YOU. THIS WILL BE AVAILABLE AS SOON AS I KNOW EVERYTHING IN THE TOOLKIT IS RUNNING SMOOTHLY 


(Changelog at the Bottom of Post#1)














PLEASE READ THE *FAQ* IN POST#2 BEFORE ASKING QUESTIONS


--------------------------------------------------------------
--------------------------------------------------------------


1. INSTALLING GALAXY S3 DRIVERS


The first thing you need to do is to install the drivers. These are needed so that you can communicate with the phone via the PC and perform the tasks that the ToolKit offers.


a. Make sure your phone is booted into Android and the USB cable is unplugged.


b. Select Option 1 in the ToolKit to install the Samsung USB Driver pack. This should install all the neccessary drivers you need.


c. After the drivers have been installed connect the USB cable and the PC should detect the phone and install the correct drivers. This will also happen when you enter Download Mode and Recovery Mode for the first time.


d. If you want to check the drivers then go to your Control Panel on your PC and open the Device Manager. With the USB cable connected you should see a device listed as 'Samsung Android Phone' or something similar and a driver attached to it.


--------------------------------------------------------------
--------------------------------------------------------------


2. USING MSKIPS' SAMSUNG GALAXY S3 TOOLKIT V1.0


a. Download the Samsung Galaxy S3 ToolKit package and run to install the ToolKit to your PC. The installation will also create a Shortcut on your desktop for easy access. You have the option to include or exclude the drivers files at installation so if you already have your drivers set up and are just updating the ToolKit then you can untick the drivers if you wish.


b. Once the ToolKit is installed make sure your phone is booted and plugged in via USB cable and double click on the 'Samsung GS3 ToolKit v1.0' shortcut on your desktop to run it.


c. When you enter the Main Menu you will see 'Adb Mode' at the top. If you have installed your drivers correctly then you will see your phones serial number under the text. If you see this then your device is connected and you can carry on.


d. Each option has full information on what it is and how to use it.


--------------------------------------------------------------
--------------------------------------------------------------


3. FLASHING A ROM, RADIO OR KERNEL VIA CWM RECOVERY


a. Download your chosen Rom, Radio or Kernel from the Development Forum, then make sure your phone is booted up as normal and connect your usb cable so it goes into MTP Mode. Copy the .zip file (DO NOT UNZIP IT FIRST) to the 'Internal Storage' part on your phone. Do not copy it to a Sub Directory as it will be harder to find when flashing it.


b. Enter CWM Recovery (shut down the phone then hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds).


c. Scroll down to 'Install zip from sdcard' and select using the HOME button. Then select 'choose zip from sdcard' if the file is on the external Memory Card or 'choose zip from internal sdcard' if the file is on Internal Memory.


d. Scroll to your zip file and select. Then scroll down to 'Yes' in the list and select to start flashing.


e. When flashing is finished press the BACK Button to go back until you get to the Main Menu and then select 'reboot system now' to reboot your phone into Android.


--------------------------------------------------------------
--------------------------------------------------------------


4. FLASHING A ROM, RADIO OR KERNEL VIA DOWNLOAD MODE USING ODIN


Odin can be used to flash image files or parts of your phone. You can flash something as simple as a boot image or a complete system. Everything is packed in a tar or tar.md5 file on your PC and flashed via Odin which is a Windows OS program.


a. Make sure you have your tar file stored on your PC.


b. Reboot your phone to Download Mode [shut down your phone, then hold down the Home + Volume DOWN Buttons and press the Power Button for about 2 seconds until a Warning screen appears. Press Volume UP to continue to Download Mode.


c. Connect your phone via usb and the first box at the top under ID:COM should turn blue and have some text in it. If you are using Download Mode on your phone for the first time then you will notice drivers being installed to use it.


d. The site or page you downloaded the file from will usually give you instructions to set Odin but if not you want to load boot/recovery/system files to the PDA location and have 'Auto Reboot' and 'F.Reset Time' ticked and nothing else.


e. Click on 'Start' to start the flash. You can see what is happening in the text box in the lower left.


--------------------------------------------------------------
--------------------------------------------------------------


USEFUL INFORMATION


How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.


How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.


--------------------------------------------------------------
--------------------------------------------------------------


ChangeLog:
ToolKit v1.0 (10th June 2012)
+New release
__________________
thanks to XDA_FORUMS....
orginaly post link followed by....